BNWFT - SAVIN 9250 BLACK TONER, PRODUCT CODE:887071.

  • MSDS: BNWFT
  • Manufacturer: RICOH CORP
  • Product Name: SAVIN 9250 BLACK TONER, PRODUCT CODE:887071.
  • National Stock Number: 6850-01-342-5146
Product Identification

Product ID:SAVIN 9250 BLACK TONER, PRODUCT CODE:887071.
MSDS Date:07/17/1991
FSC:6850
NIIN:01-342-5146
MSDS Number: BNWFT

Responsible Party
RICOH CORPORATION
3567 PARKWAY LANE, SUITE 150
NORCROSS, GA 30092
US

Emergency Phone: 404-446-3533

Info Phone: 404-446-3533

Preparer: KRISTINA SAGE

Cage: 54726

Contractor
SAVIN CORPORATION
12070 ROCKVILLE, MD 20850-4015 US

Telephone: 301-517-4272 FAX 301-517-4269

Cage: 4M009

Ingredients

HYDROTREATED HEAVY NAPHTHA (PETROLEUM)

CAS: 64742-48-9

Fraction By Weight: 75%


ACRYLIC POLYMER

CAS: 25068-63-7

Fraction By Weight: 8%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 5 - 10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


WAX

CAS: 9002-88-4

Fraction By Weight: 10%


WAX

CAS: 8015-86-9

Fraction By Weight: 2%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SLIGHT CONJUNCTIVAL
IRRITATION. SKIN: MILD IRRITATION UNDER CONDITIONS OF EXCESSIVE
EXPOSURE. INHALATION: NO UNTOWARD EFFECTS. CHRONIC: HEALTH STUDIES
HAVE SHOWN THAT MANY PETROLEUM HYDRO CARBON AND SYNTHETIC
LUBRICANTS POSE POTENTIAL HUMAN HEALTH RISKS WHICH MAY VARY FROM
PERSON TO PERSON.
Explanation of Carcinogenicity:CARBON BACK AND WAX ARE LISTED ON IARC
MONOGRAPH.IARC EVALUATED EVIDENCE AS INADEQUATE TO DETERMINE A
CARCINOGENIC RISK.
Effects of Overexposure:HIGH VAPOR CONCENTRATION (> 1000 PPM) ARE
IRRITATIVE TO EYES AND RESPIRATORY TRACT, MAY CAUSE HEADACHES AND
DIZZINESS, ARE ANESTHETIC AND MAY HAVE OTHER NERVOUS SYSTEM
EFFECTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. SKIN: REMOVE
CONTAMINATED CLOTHING. WASH AREA WITH SOAP AND WATER. INHALATION:
MOVE TO FRESH AIR. GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE
VOMITING. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:142F,61C
Lower Limits:0.7%
Upper Limits:6.5%
Extinguishing Media:FOAM, WATER SPRAY (FOG), DRY CHEMICAL OR CARBON
DIOXIDE MAY BE SUITABLE.
Fire Fighting Procedures:IF LEAK/SPILL HAS IGNITED, USE H2O TO SPRAY
DISPERSE VAPOR AND PROTECT PERSON ATTEMPTING TO STOP LEAK. USE
WATER SPRAY TO FLUSH SPILLS AWAY FROM EXPOSURES.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDIZING
AGENTS.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. RECOVER FREE
PRODUCT. ADD SAND, EARTH OR OTHER SUITABLE ABSORBENT TO SPILL.
VENTILATE CONFINED SPACES. KEEP PRODUCT OUT OF SEWERS AND
WATERCOURSES. MINIMIZE BREATHING O F VAPORS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:CAUTION - COMBUSTABLE LIQUID. KEEP OUT
OF REACH OF CHILDREN. KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAMES.
Other Precautions:EMPTY CONTAINRS RETAIN RESIDUE (LIQUID AND/OR VAPOR)
AND CAN BE DANGEROUS. IN ORDER TO AVOID THE RISK OF EXPLOSION, DO
NOT PUNCTURE OR INCINERATE.

Exposure Controls

Respiratory Protection:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Ventilation:MECHANICAL (GENERAL) VENTILATION IS ADEQUATE.
Protective Gloves:NONE NEEDED UNDER NORMAL CONDITIONS.
Eye Protection:NONE NEEDED UNDER NORMAL CONDITIONS.
Other Protective Equipment:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
MINIMIZE BREATHING VAPOR OR MIST. AVOID PROLONGED OR REPEATED CONTACT
WITH SKIN. FLASH POINT METHOD; ASTM D3828.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:142F,61C
Vapor Pres:<5 (@25C)
Vapor Density:>5.9,AIR>1
Spec Gravity:0.80(@25C)
Evaporation Rate & Reference:0.04 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE. <0.1%
Appearance and Odor:BLACK LIQUID, NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZERS SUCH AS LIQUID CHLORINE,
CONCENTRATED OXYGEN, OR HYPOCHLORITE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND OTHER
DECOMPOSITION PRODUCTS IN CASE OF INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:WASTE LIQUID SHOULD BE DISPOSED OF IN AN
ENVIRONMENTALLY SAFE MANNER IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.